Paper size
1
Dimensions Standard or
optional
550‑sheet tray
Optional
2100‑sheet tray
Multipurpose
feeder
Duplex
Universal
2
105 x 148 mm to
216 x 356 mm
(4.13 x 5.83 in. to
8.5 x 14 in.)
X
70 x 127 mm to
216 x 356 mm
(2.76 x 5 to
8.5 x 14 in.)
XX X
7 3/4 Envelope
(Monarch)
98 x 191 mm
(3.9 x 7.5 in.)
X X
9 Envelope 98 x 225 mm
(3.9 x 8.9 in.)
X X
10 Envelope 105 x 241 mm
(4.1 x 9.5 in.)
X X
DL Envelope 110 x 220 mm
(4.3 x 8.7 in.)
X X
C5 Envelope 162 x 229 mm
(6.38 x 9.01 in.)
X X
B5 Envelope 176 x 250 mm
(6.93 x 9.84 in.)
X X
Other Envelope 98 x 162 mm
(3.9 x 6.4 in.) to
176 x 250 mm
(6.9 x 9.8 in.)
X X
1
If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes
that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not
available, then select Universal or turn off tray size sensing. For more information, contact technical support.
2
To support two‑sided (duplex) printing, the Universal width must be between 105 mm (4.13 inches) and 216 mm
(8.5 inches); the Universal length must be between 148 mm (5.83 inches) and 356 mm (14 inches).
Paper sizes, types, and weights supported by the finishers
Supported paper sizes
Paper size 4‑bin mailbox High‑capacity output
expander
Staple finisher Staple, hole punch
finisher
A6
XX
A5
2 1
1
The finisher stacks the paper but does not staple or punch holes in it.
2
The finisher staples the paper if it is loaded short edge first.
Paper and specialty media guide 69
To Next Page
Loading...
Need help?
General
