Use To
Assign Type/Bin
Plain Paper Bin
Card Stock Bin
Transparency Bin
Recycled Bin
Labels Bin
Vinyl Labels Bin
Bond Bin
Envelope Bin
Rough Envelope Bin
Letterhead Bin
Preprinted Bin
Colored Bin
Light Paper Bin
Heavy Paper Bin
Rough/Cotton Bin
Custom [x] Bin
Select a bin for each supported paper type.
For each type, select the following options:
Disabled
Standard Bin
Bin [x]
Notes:
• Disabled is the factory default setting.
• [x] can be any number between 1 and 12 if the
appropriate optional bins are installed.
• If multiple bins are assigned the same name, then the
name only appears once in the bin list.
Reports menu
Reports menu
Use To
Menu Settings Page Print a report containing information about the paper loaded in trays, installed
memory, total page count, alarms, timeouts, printer control panel language,
TCP/IP address, status of supplies, status of the network connection, and other
information.
Device Statistics Print a report containing printer statistics such as supply information and details
about printed pages.
Stapler Test Print a report that confirms that the staple finisher is functioning properly.
Note: This menu appears only if an optional staple finisher is installed.
Network Setup Page Print a report containing information about the network printer settings, such as
the TCP/IP address information.
Note: This menu item appears only in network printers or in printers connected
to print servers.
Network [x] Setup Page Print a report containing information about the network printer settings, such as
the TCP/IP address information.
Notes:
• This menu item is available only when more than one network option is
installed.
• This menu item appears only in network printers or in printers connected
to print servers.
Understanding printer menus 90
To Next Page
Loading...
Need help?
General
