Dell C5519Q - Power Management Modes

About your monitor | 17
Power management modes
If you have VESA's DPM™ compliance display card or software installed in your
PC, the monitor can automatically reduce its power consumption when not in
use. This feature is called Power Save Mode*. If the computer detects input from
the keyboard, mouse or other input devices, the monitor automatically resumes
functioning. The following table shows the power consumption and signaling of this
automatic power saving feature.
VESA modes
Horizontal
sync
Vertical
sync
Video
Power
indicator
Power
consumption
Normal operation Active Active Active White 200 W
(Maximum)**
90 W (Typical)
Active-o mode
(Ehernet not turn
on)
Inactive Inactive Blank White
(Glowing)
Less than 0.5 W
Active-o mode
(Ehernet turn on)
Inactive Inactive Blank White
(Glowing)
Less than 2 W
Switch o - - - O Less than 0.5
W*
Energy Star Power consumption
P
on
85 W
ETEC 116 W
* Zero power consumption in off mode can only be achieved by disconnecting the
AC main cable from the monitor.
** Maximum power consumption with maximum luminance.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
NOTE: The message may be slightly different according to the
connected input signal.