Dell C5519Q - OSD Warning Messages

42 | Operating the monitor
OSD warning messages
When the monitor does not support a particular resolution mode you will see the
following message:
The current input timing is not supported by the monitor display.
Please change your input timing to 3840x2160, 60Hz or any
other monitor listed timing as per the monitor specifications.
Dell 55 Monitor
C5519Q
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor specifications for the horizontal and vertical
frequency ranges addressable by this monitor. Recommended mode is 3840 x 2160.
Before the DDC/CI function is disabled, the following message is displayed:
The function of adjusting display setting using PC application
will be disabled.
Do you wish to disable DDC/CI function?
Yes
No
Dell 55 Monitor
C5519Q
When the monitor enters the Power Save mode, the following message appears:
Dell P2418HZ
Dell 55 Monitor
Entering Power Save Mode.
C5519Q
Activate the computer and wake up the monitor to gain access to the Using the
On-Screen Display (OSD) menu.
If you press any button other than the power button, the following messages will
appear depending on the selected input: