Steps
1. Gently press the SIM card to release it from the SIM card slot.
2. Slide the SIM card out from the slot on the system board.
Installing the SIM card
About this task
NOTE: The following steps are applicable only for 4G LTE enabled systems.
NOTE: The following steps are not applicable for systems configured with pre-installed SIM card.
WARNING: Do not press on the SIM card connector.
If you are replacing a component, remove the existing component before performing the installation procedure. The following
image indicates the location of the SIM card and provides a visual representation of the installation procedure.
18
Removing and installing components
To Next Page
Loading...
