Display cable
Removing the Display cable
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the WWAN card for 4G LTE enabled systems.
4. Remove the display assembly.
5. Remove the display bezel.
6. Remove the display panel.
About this task
The following image indicates the location of the display cable and provides a visual representation of the removal procedure.
Steps
1. Peel the tape that secures the display cable to the display back cover.
2. Unroute the display cable from its routing channel.
3. Remove the display cable from the display back cover.
Removing and installing components
55
To Next Page
Loading...
