Installing the SIM card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
NOTE: The following steps are applicable only for 4G LTE enabled systems.
The following image indicates the location of the SIM card and provides a visual representation of the installation procedure.
Steps
1. Align and slide the SIM card into the SIM card slot on the system board.
NOTE:
Align the SIM card parallel to the system board. Insert the SIM card carefully in the direction of the SIM card
slot.
2. Gently push the SIM card until it fits into place.
For more information about how to enable 4G in your Chromebook, see Connect to a mobile data network.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Removing and installing components
17
To Next Page
Loading...
