3. Affix the three pieces of adhesive tape to secure the speaker cable in place.
4. Connect the speaker cable to the connector on the system board.
5. Affix the clear tape to secure the speaker cable in place.
Next steps
1. Install the 3-cell battery.
2. Install the base cover.
3. Follow the procedure in After working inside your computer.
Display bezel
Removing the display bezel
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the WWAN card for systems enabled with 4G LTE.
4. Remove the display assembly.
About this task
The following images indicate the location of the display bezel and provide a visual representation of the removal procedure.
Removing and installing components
43
To Next Page
Loading...
