Dell Chromebook 3110 - Display Hinges; Removing the Display Hinges

Steps
1. Align and place the camera module into the slot on the display assembly.
2. Gently press the camera module until it clicks into place.
3. Adhere the foil tape to secure the camera module.
4. Connect the camera cable to the connector on the camera module.
Next steps
1. Install the display bezel.
2. Install the display assembly.
3. Install the WWAN card for systems enabled with 4G LTE.
4. Install the base cover.
5. Follow the procedure in After working inside your computer.
Display hinges
Removing the display hinges
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the WWAN card for systems enabled with 4G LTE.
4. Remove the display assembly.
5. Remove the display bezel.
6. Remove the display panel.
About this task
The following image indicates the location of the display hinges and provides a visual representation of the removal procedure.
56
Removing and installing components