Dell Chromebook 3110 - Display Panel; Removing the Display Panel

To Next Page

To Previous Page

Steps

1. Align and place the display bezel on the display assembly.

2. Starting from the top corner, press on the display bezel and work around the entire bezel until it clicks onto the display

assembly.

3. Press both the hinge caps of the display bezel until it clicks into place.

4. Replace the four screws (M2.5x3.8) to secure the display bezel to the display assembly.

5. Adhere the stickers on the screws that secure the display bezel.

NOTE:

A new set of stickers is included with replacement display bezel. When replacing the new display bezel, adhere

the new stickers over the screws once the screws have been secured.

Next steps

1. Install the display assembly.

2. Install the WWAN card for systems enabled with 4G LTE.

3. Install the base cover.

4. Follow the procedure in After working inside your computer.

Display panel

Removing the display panel

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the base cover.

3. Remove the WWAN card for systems enabled with 4G LTE.

Removing and installing components

Other manuals for Dell Chromebook 3110