Steps
1. Use a plastic scribe to peel the stickers that cover the display bezel screws.
NOTE:
A new set of stickers is included with replacement display bezel. When replacing the new display bezel, adhere
the new stickers over the screws once the screws have been secured.
NOTE: A blade or a plastic scribe can be used to peel the display bezel stickers.
2. Remove the four screws (M2.5x3.8) that secure the display bezel to the display assembly.
3. Use a plastic scribe to carefully pry open the two recesses along the bottom side of the display bezel near the hinge caps.
Removing and installing components
45
To Next Page
Loading...
