Dell D01T

Keys Navigation
Esc Moves to the previous page until you view the main screen. Pressing Esc in the main screen displays a message
that prompts you to save any unsaved changes and restarts the system.
System Setup Options
NOTE: Depending on your computer and its installed devices, the items listed in this section may or may not appear.
Table 4. General
Option Description
System Information This section lists the primary hardware features of your computer.
• System Information
• Memory Configuration
• Processor Information
• Device Information
• PCI Information
Boot Sequence Allows you to change the order in which the computer attempts to find an operating system.
• Diskette Drive
• USB Storage Device
• CD/DVD/CD-RW Drive
• Onboard NIC
• Internal HDD
Boot List Option Allows you to change the boot list option.
• Legacy
• UEFI
Advanced Boot Options Allows you to Enable Legacy Option ROMs
• Enable Legacy Option ROMs (Default)
Date/Time Allows you to set the date and time. The changes to the system date and time takes effect immediately.
Table 5. System Configuration
Option Description
Integrated NIC Allows you to configure the integrated network controller. The options are:
• Enable UEFI Network Stack
• Disabled
NOTE: You can use the Disabled option, only if Active Management Technology (AMT)
option is disabled.
• Enabled
• Enabled w/PXE (Default)
Integrated NIC 2 Allows you to configure the integrated network controller. The options are:
• Enabled (Default)
• Enabled w/PXE
NOTE: This feature is supported only on Tower 7910.
Serial Port Identifies and defines the serial port settings. You can set the serial port to:
• Disabled
• COM1 (Default)
• COM2
• COM3
System setup 37