Option Description
HDD Fans Allows you to control the HDD fans.
Default Setting: depends on the system configuration
Audio Allows you enable or disable the audio feature.
• Enable Audio (Default)
Memory Map IO above
4GB
Allows you enable or disable Memory Map IO above 4GB.
• Memory Map IO above 4GB - This option is disabled by default.
Thunderbolt Allows you to enable or disable Thunderbolt device support capability.
• Enabled
• Disabled (Default)
Miscellaneous devices Allows you to enable or disable various on board devices.
• Enable PCI Slot
PCI MMIO Space Size This table gives you POST diagnostic LED pattern information.
Table 6. Video
Option Description
Primary Video Slot Allows you to configure primary boot video device. The options are:
• Auto (Default)
• SLOT 1
• SLOT 2: VGA Compatible
• SLOT 3
• SLOT 4
• SLOT 5
• SLOT 6 ( Tower 5810 and Tower 7810 only)
• SLOT1_CPU2: VGA Compatible (Tower 7910 only)
• SLOT2_CPU2 (Tower 7910 only)
Table 7. Security
Option Description
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
Password Configuration You can define the length of your password. Min = 4 , Max = 32
Password Bypass Allows you to enable or disable the permission to bypass the System password, when it is set. The options
are:
• Disabled (Default)
• Reboot bypass
Password Change Allows you to enable the disable permission to the System passwords when the administrator password is
set.
Default Setting: Allow Non-Admin Password Changes is selected
TPM Security Allows you to enable the Trusted Platform Module (TPM) during POST.
Default Setting: The option is disabled.
Computrace (R) Allows you to activate or disable the optional Computrace software. The options are:
• Deactivate (Default)
• Disable
• Activate
System setup 39