Table 11. POST Behavior
Option Description
Numlock LED Specifies if the NumLock function can be enabled when the system boots. This option is enabled by
default.
Keyboard Errors Specifies whether keyboard related errors are reported when it boots. This option is enabled by default.
Fastboot Allows you to speed up the boot process by bypassing some compatibility steps. The options are:
• Minimal
• Thorough - This option is enabled by default.
• Auto
Table 12. Virtualization Support
Option Description
Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization technology.
• Enable Intel Virtualization Technology - This option is enabled by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
provided by Intel Virtualization technology for direct I/O.
• Enable VT for Direct I/O - This option is enabled by default.
Trusted Execution Allows you to specify whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
hardware capabilities provided by Intel Trusted Execution Program.
• Trusted Execution - This option is disabled by default.
Table 13. Maintenance
Option Description
Service Tag Displays the service tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
SERR Messages Controls the SERR message mechanism. This option is not set by default. Some graphics cards require
that the SERR message mechanism be disabled.
Table 14. System Logs
Option Description
BIOS events Displays the system event log and allows you to clear the log.
• Clear Log
Table 15. Engineering Configurations
Option Description
ASPM
• Auto (Default)
• L1 Only
• Disabled
• L0s and L1
• L0s Only
Pcie LinkSpeed
• Auto (Default)
• Gen1
• Gen2
• Gen3
42 System setup
To Next Page
Loading...