Dell E28S Series

Port F
Sets the drive type of the selected device. For Embedded SATA settings in ATA mode, set
this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
Option
Description
Model
Specifies the drive model of the selected device.
Drive Type
Specifies the type of drive attached to the SATA port.
Capacity
Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.
Port G
Sets the drive type of the selected device. For Embedded SATA settings in ATA mode, set
this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
Option
Description
Model
Specifies the drive model of the selected device.
Drive Type
Specifies the type of drive attached to the SATA port.
Capacity
Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.
Port H
Sets the drive type of the selected device. For Embedded SATA settings in ATA mode, set
this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
Option
Description
Model
Specifies the drive model of the selected device.
Drive Type
Specifies the type of drive attached to the SATA port.
Capacity
Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.
Pre-operating system management applications
Dell PowerEdge R430 Owner's Manual 73