Figure 82. Installing the information tag
Figure 83. Installing the control panel assembly
2 To install the information tag, push the information tag into the control-panel slot.
3 Connect the control panel cable and the control panel USB cable to the control panel assembly.
4 Align and insert the control panel into the control panel slot in the chassis.
5 Secure the control panel to the chassis by using the screw.
6 Connect the control panel cable and the control panel USB cable to the system board.
Next step
1 Follow the procedure listed in After working inside your system.
Installation and Service Manual
Installing and removing system components
133
To Next Page
Loading...
