Dell E30S002 - System Health and System ID Indicator Codes

System health and system ID indicator codes
The system health and system ID button is located on the front panel of your system.
Figure 7. System health and system ID buttons
Table 3. System health and system ID indicator codes
System health and system ID indicator code Condition
Solid blue Indicates that the system is turned on, system is healthy, and system
ID mode is not active. Press the system health and system ID button
to switch to system ID mode.
Blinking blue Indicates that the system ID mode is active. Press the system health
and system ID button to switch to system health mode.
Solid amber Indicates that the system is in fail-safe mode. If the problem persists,
see the Getting help section.
Blinking amber Indicates that the system is experiencing a fault. Check the System
Event Log for specic error messages. For more information about
error messages, see the Dell Event and Error Messages Reference
Guide at Dell.com/openmanagemanuals > OpenManage software.
Related link
Getting help
16
Installation and Service Manual
Dell EMC PowerEdge T440 overview