Dell E30S002 - Updating BIOS; Restoring the Service Tag Using Easy Restore

Figure 88. Installing the system ears
Next steps
1 Install the system cover.
2 Install the system in the rack. For more information, see the Rack Installation Guide that is shipped with your system.
3 Follow the procedure listed in After working inside your system.
Updating BIOS
About this task
To update the BIOS, perform the following steps:
Steps
1 Copy the BIOS update le on a USB device.
2 Plug in the USB device into any of the USB ports on your system.
3 Turn on your system.
4 While booting, press F11 to enter the Boot Manager.
5 Go to System Utilities → BIOS Update File Explorer, and select the plugged in USB device.
6 From the BIOS Update File Explorer, select the BIOS update le.
The BIOS Update Utility with the current and new version of BIOS is displayed.
7 Select Continue BIOS Update to install the BIOS update.
Restoring the Service Tag using Easy Restore
The easy restore feature allows you to restore your service tag, license, UEFI conguration, and the system conguration data after
replacing the system board. All data is backed up in a backup ash device automatically. If BIOS detects a new system board, and the
service tag in the backup ash device, BIOS prompts the user to restore the backup information.
Below is a list of options available:
• Restore the service tag, license, and diagnostics information, press Y
• Navigate to the Lifecycle Controller based restore options, press N.
Installation and Service Manual
Installing and removing system components
141