Dell EMC NX430 System - Memory Specifications; Power Specifications; Drive Specifications

PCI Express
Generation 3
expansion slots
(without
expansion card
risers)
Specication
PCIE_G3_X8 One x8 link for riser
Memory specications
Memory Specication
Architecture 1600 MT/s, 1866 MT/s, or 2133 MT/s DDR4 Unbuered DIMMs
Support for advanced ECC or memory optimized operation
Memory module
sockets
Four 288-pin sockets
Memory module
capacities (UDIMM)
4 GB (single-rank), 8 GB (single- and dual-rank), 16 GB (single- and dual-rank)
Minimum RAM 4 GB
Maximum RAM 64 GB
Power specications
Power supply
unit
Specication
Power rating per
power supply unit
350 W (Platinum) (100–240 V AC, 50/60 Hz, 4.8 A–2.4 A)
Heat dissipation 1357.1 BTU/hr
NOTE: Heat dissipation is calculated by using the power supply wattage rating.
Voltage 100-240 V AC, autoranging, 50/60 Hz
NOTE: This system is also designed to be connected to IT power systems with a phase-to-phase voltage
not exceeding 230 V.
Drive specications
Drives
Specication
Four hard drive
systems
Up to four 3.5-inch hot swappable SAS, SATA, or Nearline SAS hard drives
NOTE: For more information about PERC, see the Dell PowerEdge RAID Controller (PERC)
documentation at Dell.com/storagecontrollermanuals.
Optical drive One optional slim SATA DVD-ROM or DVD+/-RW drive.
20 Technical specications