Dell EMC NX430 System - Page 68

The following table provides a guide for installing expansion cards to ensure proper cooling and mechanical t. The expansion cards with the
highest priority must be installed rst using the slot priority indicated. All other expansion cards must be installed in card priority and slot
priority order.
Table 16. Expansion card installation order
Card priority Card type Slot priority Maximum allowed
1 RAID PowerEdge RAID
Controller (PERC)
H730 and H330
Internal PERC slot 1
PERC H830 Full
Height
2 1
PERC H830 Low
Prole
1 1
2 10 Gb NICs Intel and Broadcom
Dual Port
2 1
Intel and Broadcom
Dual Port Low Prole
1 1
3 FC8 HBA Qlogic QLE2562,
Qlogic QLE2560,
Emulex LPE12002,
Emulex LPE12000,
Emulex LPE15000,
and Emulex
LPE15002
2 1
Qlogic QLE2562,
Qlogic QLE2560,
Emulex LPE12002,
Emulex LPE12000,
Emulex LPE15000,
and Emulex
LPE15002 Low
Prole
1 1
4 1 Gb NICs Intel and Broadcom
Dual and Quad Port
2 1
Intel and Broadcom
Dual and Quad Port
Low Prole
1 1
5 Non-RAID 12GB SAS HBA Full
Height
2 1
12GB SAS HBA Low
Prole
1 1
68 Installing and removing system components