Dell EMC PowerEdge R650 - Optional BOSS S2 Module; Removing the BOSS S2 Filler

Figure 91. Installing the M.2 SSD module
Next steps
1. Install the BOSS card. Installing the BOSS is similar to installing expansion card into the expansion card riser.
2. Follow the procedure listed in the After working inside your system.
Optional BOSS S2 module
Removing the BOSS S2 filler
Prerequisites
Follow the safety guidelines listed in the Safety instructions.
Steps
Press and pull the BOSS S2 filler out from the BOSS S2 module bay.
110
Installing and removing system components