Dell EMC PowerEdge R750 - Installing the Rear Drive Module Air Shroud

Figure 68. Removing the rear drive module air shroud
Next steps
1. Replace the rear drive module air shroud.
Installing the rear drive module air shroud
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
Steps
1. Align the rear drive module air shroud with the rear drive module on the system.
2. Lower the air shroud into the rear drive module until it is firmly seated.
Figure 69. Installing the rear drive module air shroud
Installing and removing system components
71