Figure 91. 24 x 2.5-inch drive backplane
1. DST_SA1 2. SRC_SA1
3. DST_SB1 4. BP_PWR_1
5. BP_DST_PA1 (PCIe/NVMe connector) 6. BP_PWR_2
7. BP_ DST_PB1 (PCIe/NVMe connector) 8. BP_PWR_CTRL
9. BP_ DST_PA2 (PCIe/NVMe connector) 10. BP_ DST_PB2 (PCIe/NVMe connector)
Figure 92. 24 x 2.5-inch NVMe switched backplane
1.
BP_PWR_CTRL2 2. BP_PWR_2
3. BP_PWR_1 4. BP_PWR_CTRL1
Figure 93. 24 x 2.5-inch NVMe switched board
1.
DST_PA2 2. DST_PB2
3. DST_PA1 4. DST_PB1
Removing the drive backplane
Prerequisites
CAUTION:
To prevent damage to the drives and backplane, remove the drives from the system before removing
the backplane.
90 Installing and removing system components
To Next Page
Loading...
