6. Remove the wireless card.
7. Remove the right fan.
8. Remove the heat sink.
About this task
The following image indicates the connectors and M.2 card slots on your system board.
1. Power-adapter port cable
2. Display cable
3. Right fan cable
4. Battery cable
5. Keyboard cable
6. Keyboard-backlight cable
7. M.2 solid-state drive card slot
8. M.2 wireless-card cable
9. Speaker cable
10. Touchpad cable
11. I/O-board cable
12. Left fan cable
13. Power-button cable
The following image(s) indicate the location of the system board and provides a visual representation of the removal procedure.
Removing and installing components
45
To Next Page
Loading...
