Dell Inspiron 15 3525 - Heat Sink; Removing the Heat Sink

To Next Page

To Previous Page

Steps

1. Place the I/O daughter board FFC on the palm-rest and keyboard assembly.

For systems shipped with a plastic chassis, slide and place the I/O daughter board FFC underneath the wireless card

antenna cables on the palm-rest and keyboard assembly.

2. Connect the I/O daughter board FFC the connector on the I/O board.

3. Connect the I/O daughter board FFC the connector on the system board.

Next steps

1. Install the fan.

2. Install the base cover.

3. Install the SD card.

4. Follow the procedure in After working inside your computer.

Heat sink

Removing the heat sink - UMA

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the SD card.

3. Remove the base cover.

Removing and installing components

Dell Inspiron 15 3525 - Heat Sink; Removing the Heat Sink - UMA