7. Press down on the display bezel and snap the display bezel in place.
Next steps
1. Install the hinges.
2. Install the display bezel.
3. Install the hinge caps.
4. Install the display assembly.
5. Install the wireless card.
6. Install the base cover.
7. Install the SD card.
8. Follow the procedure in After working inside your computer.
Hinge caps
Removing the hinge caps
Prerequisites
NOTE: This procedure is applicable for systems with plastic chassis.
1. Follow the procedure in Before working inside your computer.
2. Remove the SD card.
3. Remove the base cover.
4. Remove the wireless card.
5. Remove the display assembly.
About this task
The following images indicate the location of the hinge caps and provide a visual representation of the installation procedure.
62
Removing and installing components
To Next Page
Loading...
