GUID-2850CA15-9CEF-415A-ADAA-1614E65C491B
Removing the display back-cover
and antenna assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
GUID-FB117589-0724-4398-AF92-6CA56F7F5134
Prerequisites
NOTE: These instructions are applicable only for laptops with a non-touch
screen display.
1 Remove the base cover.
2 Remove the battery.
3 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
4 Remove the keyboard
5 Remove the palm-rest assembly.
6 Remove the fans.
7 Remove the display assembly.
8 Remove the display bezel.
9 Remove the display panel.
10 Remove the display hinge and bracket assembly.
11 Remove the camera.
108
To Next Page
Loading...
