GUID-DC61C8F1-86D0-49DE-B8D8-229750E714D6
Removing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
GUID-4E2BE14F-6641-4FA5-8393-1D705E89011F
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
4 Remove the keyboard.
5 Remove the palm-rest assembly.
GUID-FC2C2F7E-7427-49C5-BA7E-482D730890E0
Procedure
1 Peel o the tape to open the latch and disconnect the I/O-board cable from the
I/O board.
2 Disconnect the I/O-board power cables from the I/O board.
3 Disconnect the subwoofer cable from the I/O board.
63
To Next Page
Loading...
