GUID-792E5316-8EFA-4894-AE68-995416D3FD47
Replacing the solid-state drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the
solid-state drive.
GUID-F43E0F48-6AE0-4FA8-9D33-4565FF316C2B
Procedure
1 Align the notch on the solid-state drive with the tab on the solid-state drive slot
and slide the solid-state drive into the solid-state drive slot.
2 Press the other end of the solid-state drive and slide the solid-state drive shield
on the solid-state drive.
3 Align the screw hole on the solid-state drive and solid-state drive shield with the
screw hole on the computer base.
31
To Next Page
Loading...
