GUID-843C6FE2-25D0-48C6-8EB2-9829A89CC1C8
Replacing the subwoofer
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
GUID-690FE132-660D-4D0B-9C1B-0C0FA0BEA347
Procedure
NOTE: The rubber grommets may get pushed out while replacing the
subwoofer. Ensure that the rubber grommets are in their position after
placing the subwoofer on the computer base.
1 Using the alignment posts, align and place the subwoofer on the computer base.
2 Route the subwoofer cable through the routing guides on the computer base.
3 Replace the rubber grommets if they are pushed up while replacing the sub
woofers.
GUID-40A7CF05-B2F6-46AF-8994-9D9AA0A21ADE
Post-requisites
1 Follow the procedure from step 3 to step 8 in “Replacing the system board”.
2 Replace the fans.
3 Replace the I/O board.
4 Replace the palm-rest assembly.
5 Replace the keyboard.
6 Replace the wireless card.
7 Replace the solid-state drive.
8 Replace the memory modules.
82
To Next Page
Loading...
