Replacing the camera
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Connect the camera cable to the camera.
2 Align the camera to the alignment posts on the display back-cover and snap the
camera in place.
Post-requisites
1 Replace the display bezel.
2 Replace the display assembly.
3 Replace the system board.
4 Replace the heat-sink assembly.
5 Replace the I/O board.
6 Replace the wireless card.
7 Replace the memory module.
8 Follow the procedure from step 4 to step 6 in “Replacing the hard drive”.
9 Follow the procedure from step 3 to step 7 in “Replacing the base cover”.
10 Follow the procedure from step 4 to step 5 in “Replacing the optical drive”.
11 Replace the keyboard.
42
Replacing the camera 101