Replacing the palm rest
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
Place the palm rest on a clean and flat surface.
Post-requisites
1 Replace the display assembly.
2 Replace the touch pad.
3 Replace the system board.
4 Replace the heat-sink assembly.
5 Replace the I/O board.
6 Replace the wireless card.
7 Replace the memory module.
8 Follow the procedure from step 4 to step 6 in “Replacing the hard drive”.
9 Follow the procedure from step 3 to step 7 in “Replacing the base cover”.
10 Follow the procedure from step 4 to step 5 in “Replacing the optical drive”.
11 Replace the keyboard.
12 Replace the battery.
46
Replacing the palm rest 109