Dell Inspiron 15 - 6 Replacing the Optical Drive; Procedure; Post-Requisites

Replacing the optical drive
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Align the screw hole on the optical-drive bracket with the screw hole on the
optical drive.
NOTE: You must correctly align the optical-drive bracket to ensure that the
optical drive can be properly secured to the computer. For correct
orientation, see step 5 in “Removing the optical drive”.
2 Replace the screw that secures the optical-drive bracket to the optical drive.
3 Align the tabs on the optical-drive bezel with the slots on the optical drive and
snap the optical-drive bezel into place.
4 Slide the optical-drive assembly into the optical-drive bay.
5 Replace the screw that secures the optical-drive assembly to the base cover.
Post-requisites
Replace the battery.
6
Replacing the optical drive 19