9 Replace the screw that secures the system board to the palm-rest assembly.
10 Close the display hinge and align the screw hole on the display hinge with the
screw hole on the system board.
11 Replace the screw that secures the display hinge to the system board .
12 Turn the computer over and open the display as far as possible,
13 Slide the touch-pad cable and the power-button board cable into their
connectors on the system board and close the latches to secure the cables.
Post-requisites
1 Replace the heat-sink assembly.
2 Replace the I\O board.
3 Replace the wireless card.
4 Replace the memory module.
5 Follow the procedure from step 4 to step 6 in “Replacing the hard drive”.
6 Follow the procedure from step 3 to step 7 in “Replacing the base cover”.
7 Replace the keyboard.
8 Follow the procedure from step 4 to step 5 in “Replacing the optical drive”.
9 Replace the battery.
Replacing the system board 70
To Next Page
Loading...
