Replacing the fan
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Place the fan on the heat-sink assembly.
2 Adhere the tape that secures the fan cable to the heat-sink assembly.
3 Turn the heat-sink assembly over.
4 Replace the screws that secure the fan to the heat-sink assembly.
Post-requisites
1 Replace the heat-sink assembly.
2 Follow the procedure from step 3 to step 7 in “Replacing the base cover”.
3 Replace the keyboard.
4 Follow the procedure from step 4 to step 5 in “Replacing the optical drive”.
5 Replace the battery.
28
Replacing the fan 63
To Next Page
Loading...
