Table 38. System setup options—System Management menu(continued)
System Management
By default, this option is enabled.
Power-on-Self-Test Automatic
Recovery
Power-on-Self-Test Automatic Recovery This option enables or disables the BIOS to attempt an automatic recovery of the
computer- such as reverting BIOS Setup configuration settings to BIOS.
By default, this option is enabled.
Table 39. System setup options—Keyboard menu
Keyboard
Keyboard Errors
Enable Keyboard Error Detection Enables or disables report of keyboard-related errors when the computer boots.
By default, this option is enabled.
Numlock LED
Enable Numlock LED Enables or disables Numlock when the computer boots.
By default, this option is enabled.
Table 40. System setup options—Preboot Behavior menu
Preboot Behavior
Adapter Warnings
Enable Dock Warning Messages Enables the warning messages during boot when the adapters with less power
capacity are detected.
By default, the Enable Dock Warning Messages option is enabled.
Warnings and Errors Enables or disables the action to be taken when a warning or error is
encountered.
By default, the Prompt on Warnings and Errors option is selected. Stop,
prompt, and wait for user input when warnings or errors are detected.
NOTE: Errors deemed critical to the operation of the computer hardware
stop the functioning of the computer.
Fastboot Allows you to configure the speed of the UEFI boot process.
By default, the Thorough option is selected. Performs complete hardware and
configuration initialization during boot.
Extend BIOS POST Time Sets the BIOS POST (Power-On Self-Test) load time.
By default, the 0 seconds option is selected.
Table 41. System setup options—Virtualization menu
Virtualization Support
Intel Virtualization Technology
Enable Intel Virtualization Technology (VT) When enabled, the computer can run a Virtual Machine Monitor (VMM).
By default, the Enable Intel Virtualization Technology (VT) option is enabled.
VT for Direct I/O
BIOS Setup 105
To Next Page
Loading...
