Figure 30. Removing the memory module
Steps
1. Carefully spread apart the securing-clips on each end of the memory-module slot until the memory module is released.
2. Slide and remove the memory module from the memory-module slot.
NOTE: Repeat steps 1 and 2 if you want to remove the other memory module.
Installing the memory module
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the memory module and provides a visual representation of the installation
procedure.
54
Removing and installing Customer Replaceable Units (CRUs)
To Next Page
Loading...
