Figure 21. Installing the back cover
Steps
Align the slots on the back cover with the slots on the computer, and press along the side to snap the back cover into place.
Next steps
1. Follow the procedure in After working inside your computer.
I/O cover
Removing the I/O cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the stand.
3. Remove the back cover.
About this task
The following image indicates the location of the I/O cover and provides a visual representation of the removal procedure.
46
Removing and installing Customer Replaceable Units (CRUs)
To Next Page
Loading...
