Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the wireless card.
3 Remove the computer base.
4 Remove the back cover.
NOTE: Depending on the configuration you ordered, the
appearance of the camera may differ.
Procedure for removing the 3D camera
1 Disconnect the camera cable from the camera.
62
To Next Page
Loading...
