Dell Inspiron 24 - Replacing the Control-Buttons Board; Procedure; Post-Requisites

Replacing the control-buttons
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Place the control-buttons board on the buttons bracket.
2 Place the control-buttons board assembly into the slot on the display
bezel and snap it in place.
Post-requisites
1 Replace the display panel.
2 Replace the power-button module.
3 Replace the microphones.
4 Replace the camera.
5 Replace the stand assembly.
6 Replace the back cover.
7 Replace the computer base.
8 Replace the wireless card.
9 Replace the base cover.
94