Clearing CMOS settings
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
1 Remove the base cover.
2 Remove the jumper plug from pins 3 and 4 and replace it on pins 1 and 3.
1 jumper plug 2 pin 2
3 pin 4 4 pin 1
5 pin 3
3 Replace the base cover.
4 Turn on your computer and wait till the operating system is completely
loaded.
97
To Next Page
Loading...
