Removing and Installing Parts 143
10
Check all cable connections, and fold cables out of the way to avoid
blocking airflow between the fan and cooling vents.
11
Replace and tighten the two screws securing the CD/DVD drive.
12
Replace the bezel (see "Replacing the Bezel" on page 122).
13
Replace the computer cover (see "Replacing the Computer Cover" on
page 160).
NOTICE: To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
1 CD/DVD drive 2 second CD/DVD drive 3 data cable
4 power cable 5 system board connector 6 screw holes in the
CD/DVD drive bay
1
2
3
4
5
6
book.book Page 143 Monday, December 10, 2007 3:12 PM
To Next Page
Loading...
