Removing and Installing Parts 135
Replacing the Drive Panel Insert
Align the drive panel insert along the edges of the empty slot of the floppy
drive and push the panel insert. The drive panel insert is locked in place.
NOTE: To comply with FCC regulations, it is recommended that you replace the
drive panel insert whenever the floppy drive is removed from the computer.
Media Card Reader
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
1 drive panel insert (optional) 2 back of the computer
2
1
book.book Page 135 Monday, December 10, 2007 3:12 PM
To Next Page
Loading...
