Dell INSPIRON 530 DCMF - Setting up a Home and Office Network; Connecting to a Network Adapter

52 Setting Up and Using Your Computer
There are two ways to access the Easy Transfer wizard:
1
When Vista setup is completed, you will see the Vista Welcome Center.
One icon in the Welcome Center is
Transfer Files and Settings . Click this
icon to start Windows easy Transfer.
2 If the Welcome Center dialog box has been closed, you can access Easy
Transfer by clicking Start ,
→ All Programs → Accessories → System
Tools
→ Easy Transfer.
Double-click the Easy Transfer icon to begin the process.
Setting Up a Home and Office Network
Connecting to a Network Adapter
NOTICE: Plug the network cable into the network adapter connector on the
computer. Do not plug the network cable into the modem connector on the
computer. Do not plug a network cable into a telephone wall jack.
1 Connect the network cable to the network adapter connector on the back
of your computer.
Insert the cable until it clicks into place, and then gently pull it to ensure
that it is secure.
2 Connect the other end of the network cable to a network device.
1 network adapter connector 2 network device
3 network adapter connector on computer 4 network cable
2
3
4
1
book.book Page 52 Monday, December 10, 2007 3:12 PM