Removing and Installing Parts 139
CD/DVD Drive
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
Removing a CD/DVD Drive
1
Follow the procedures in "Before You Begin" on page 99.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 101).
3
Remove the bezel (see "Removing the Bezel" on page 121).
4
Disconnect the CD/DVD drive data cable from the system board connector.
5
Disconnect the power cable and the CD/DVD drive data cable from the
back of the drive.
1 CD/DVD drive 2 data cable 3 power cable
4 system board connector 5 custom screws (2)
1
2
4
3
5
book.book Page 139 Monday, December 10, 2007 3:12 PM
To Next Page
Loading...
