Removing and Installing Parts 151
NOTE: The processor fan/heat sink assembly in your computer may not look
exactly like the one shown in the illustration above.
Installing the Processor Fan/Heat Sink Assembly
NOTICE: When reinstalling the fan, ensure that you do not pinch the wires that run
between the system board and the fan.
1
Align the captive screws on the processor fan/heat sink assembly to the
four metal screw hole projections on the system board.
NOTE: The processor fan/heat sink assembly in your computer may not look
exactly like the one shown in the illustration above.
2
Tighten the four captive screws.
NOTE: Ensure that the processor fan/heat sink assembly is correctly seated
and secure.
1 processor fan/heat sink assembly
1 processor fan/heat sink assembly
1
1
book.book Page 151 Monday, December 10, 2007 3:12 PM
To Next Page
Loading...
