134 Removing and Installing Parts
13
Connect your computer and devices to their electrical outlets, and turn
them on.
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
14
Enter system setup (see "System Setup" on page 168) and select the
appropriate
Diskette Drive
option.
15
Verify that your computer works correctly by running the Dell Diagnostics
(see "Dell Diagnostics" on page 84).
Removing the FlexBay Break-Away Metal Plate
Align the tip of a Phillips screwdriver with the slot on the break-away metal
plate and rotate the screwdriver outwards to break and remove the metal plate.
book.book Page 134 Monday, December 10, 2007 3:12 PM
To Next Page
Loading...
