Pairing your wireless mouse
12
Add device
1. Select Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth.
2. Select Dell MS355, and then click Done.
NOTE: If Dell MS355 is not listed in your computer, check and ensure that the pairing mode is enabled on the mouse.
3. Confirm the pairing process on both the wireless mouse and your computer.
The Bluetooth LED ( ) turns solid white for a few seconds to confirm the pairing, and then the light turns off. After your mouse and
computer pairing is completed, the mouse connects to the computer automatically when the Bluetooth is enabled and both devices
are within the Bluetooth range.
Figure 16. The mouse pairing process is completed (1 of 2)
Figure 17. The mouse pairing process is completed (2 of 2)
To Next Page
Loading...
