Table 7. System Configuration (continued)
Option Description
This option is enabled by default.
USB Configuration
Allows you to enable or disable the internal/integrated USB
configuration.
The options are:
● Enable USB Boot Support
● Enable External USB Ports
All the options are set by default.
NOTE: USB keyboard and mouse always work in the BIOS
setup irrespective of these settings.
SATA Operation
Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Click one of the following options:
● Disabled
● AHCI
● RAID—Default
NOTE: SATA is configured to support RAID mode.
Drives
Allows you to enable or disable various drives on board.
The options are:
● SATA-0
● M.2 PCIe SSD-0/SATA-2
All the options are set by default.
Miscellaneous devices
Allows you to enable or disable various on board devices.
● Enable Camera—Default
● Enable Hard Drive Free Fall Protection—Default
● Enable Secure Digital (SD) Card—Default
● Secure Digital Card (SD) Read-Only Mode
● Secure Digital (SD) Card Boot
Enable USB PowerShare
Allows you to On or Off external devices to be powered or
charged using the stored system battery.
Keyboard Illumination
This field lets you choose the operating mode of the keyboard
illumination feature. The keyboard brightness level can be set
from 0% to 100%.
The options are:
● Disabled
● Dim
● Bright—Default
Keyboard Backlight Tmeout on AC
Allows you to define the timeout value for the keyboard
backlight when an AC adapter is plugged in the system. The
Keyboard Backlight timeout value is only in effect when the
backlight is enabled.
● 5 seconds
● 10 seconds—Default
● 15 seconds
● 30 seconds
System setup 119
To Next Page
Loading...
