Table 6. General (continued)
Option Description
The options are:
● Windows Boot Manager
● UEFI Hard Drive
The Boot Sequence window allows you to change the
boot sequence options.
Click one of the following options:
○ Add Boot Option
○ Remove Boot option
○ View
Bios Setup Advanced Mode
Allows you to Enable or Disable BIOS Setup Advance mode
settings.
UEFI Boot Path Security
Allows you to control whether the system prompts the user to
enter the Admin password when booting to a UEFI boot path.
Click one of the following options:
● Always, Except Internal HDD—Default
● Always
● Never
System configuration
Table 7. System Configuration
Option Description
Date/Time
Allows you to set the date and time. The change to the
system date and time takes effect immediately.
Enable SMART Reporting
This field controls whether hard drive errors for integrated
drives are reported during system startup. This technology is
part of the SMART (Self Monitoring Analysis and Reporting
Technology) specification. This option is disabled by default.
Integrated NIC
Allows you to configure the integrated network controller.
Click one of the following options:
Enable UEFI Network Stack
If enabled, UEFI networking protocols are installed, allowing
pre-OS and early OS networking features to use enabled
NICs. This maybe used without PXE turned on.
Integrated NIC
● Disabled
● Enabled
● Enabled w/PXE—Default
Enable Audio
Allows you to switch all integrated audio On/Off, or enable/
disable the microphone and the internal speaker separately.
The options are:
● Enable Audio
● Enable Microphone
● Enable Internal Speaker
118 System setup
To Next Page
Loading...
